home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Overload Trio 2
/
Shareware Overload Trio Volume 2 (Chestnut CD-ROM).ISO
/
dir24
/
tvro12.zip
/
TVROASST.DOC
< prev
next >
Wrap
Text File
|
1994-05-21
|
41KB
|
794 lines
┌──╥──┐ ╖ ╓ ╓────╖ ╓────╖
║ ╙╖ ╓╜ ║ ║ ║ ║
║ ╙╖ ╓╜ ╟──╥─╜ ║ ║
║ ╙╖╓╜ ║ ╙╖ ║ ║
╨ ╙╜ ╨ ╙ ╙────╜
╓╖ ╓─────╖ ╓─────╖ ╥ ╓─────╖ ┌──╥──┐ ╓╖ ╓╖ ╥ ┌──╥──┐
╓╜╙╖ ║ ║ ║ ║ ║ ╓╜╙╖ ║╙╖ ║ ║
╓╜ ╙╖ ╙─────╖ ╙─────╖ ║ ╙─────╖ ║ ╓╜ ╙╖ ║ ╙╖ ║ ║
╓╨────╨╖ ║ ║ ║ ║ ║ ╓╨────╨╖ ║ ╙╖║ ║
╨ ╨ ╙─────╜ ╙─────╜ ╨ ╙─────╜ ╨ ╨ ╨ ╨ ╙╜ ╨ tm
Version 1.20
COPYRIGHT (C) 1994 CHRIS DAVIS SOFTWARE SYSTEMS
All Rights Reserved
PKUNZIP is a registered trademark of PKWARE, Inc.
CONTENTS i
======================================================================
Installation.........................................................1
About the program....................................................1
Shareware notice.....................................................2
Program distribution.................................................2
What is TVRO?........................................................3
Features.............................................................3
Determining your coordinates.........................................4
Magnetic correction..................................................5
Main menu............................................................5
Display location.....................................................6
Change location......................................................6
Database maintenance.................................................6
Add a satellite......................................................7
Delete a satellite...................................................8
Modify a satellite...................................................8
Satellite information display........................................8
Antenna calculation..................................................9
Satellite file backup...............................................10
Installing your satellite dish......................................10
Need some problem solving?..........................................12
System requirements.................................................13
Suggestions for future upgrades.....................................13
Disclaimer..........................................................13
Registration form...................................................14
INSTALLATION 1
======================================================================
If you received this program on a disk, you can run it by installing
the disk in the appropriate drive, changing the current drive to that
drive, and then typing TVRO.
You can install the program on your hard drive from the DOS prompt.
At the prompt (i.e. 'C:\>'), make a directory for the TVRO ASSISTANT.
An example would be a directory named 'TVRO'. Type 'MD TVRO' from the
prompt. Then, either type 'A:INSTALL xxxxxx' or 'B:INSTALL xxxxxx'
where 'xxxxxx' is the full directory location where you want to
install the TVRO Assistant. An example would be 'A:INSTALL C:\TVRO'.
INSTALL will copy all files to the indicated directory.
If you received this program from a BBS, you have already used
PKUNZIP to unzip the file TVROxx.ZIP. All files should be place in
the same directory, whether on floppy or hard disk drive.
An unregistered version of the TVRO ASSISTANT must be started by
running the file 'TVRO.EXE'.
ABOUT THE PROGRAM
=================
The TVRO ASSISTANT provides information concerning the relationship
between your satellite dish antenna and the satellites in orbit. You
don't have to be in the business of installing TVRO dishes to find
this program useful.
This program was written because there is very little software
available (shareware that is) for calculating the location in the sky
that a satellite dish must look to receive signals from the
satellites. The programs seemed to either be lacking in useful
functions or they provided information that was of little use to the
average dish owner.
Most people don't realize how easy it is to align a satellite dish to
track the satellites. Satellite TV dealers routinely charge as much
as $500 to install a satellite system. For the average person, with
a little electronic knowledge and the willingness to do a little work,
installing the dish yourself can be rewarding, in more ways than one.
TVRO ASSISTANT will give you just about all the technical calculations
you'll need to install your satellite dish and align it to track the
satellites. If you're not installing a dish, but already have a dish
up and running, TVRO ASSISTANT can be used if the tracking of your
dish is ever disturbed or you can use it to help friends get their
dishes up and running.
SHAREWARE NOTICE 2
======================================================================
TVRO ASSISTANT is not free and it is not public domain software. It
is a copyrighted, commercial program. As shareware, you are allowed
to use the program on a trial basis, to evaluate its operation and
determine if it is something you will use. The trial period is 15
days. If you continue to use the program after the 15-day period,
your are expected to pay the registration fee. CHRIS DAVIS SOFTWARE
SYSTEMS retains all rights to the program and sale of the program
by anyone else is prohibited.
The following files must be included in any distribution:
README.1ST ACH2.HLP
TVROASST.DOC SDH1.HLP
TVRO.EXE CLH1.HLP
SATCALC.EXE SAH1.HLP
SW.EXE SBH1.HLP
CLSW.EXE DH1.HLP
SATFILE.DAT DH2.HLP
HOME.DAT LDH1.HLP
CITIES.DOC MMH1.HLP
MAGCOR.DOC SH1.HLP
WHATS.NEW SMH1.HLP
ACH1.HLP FILE_ID.DIZ
If you register your copy of TVRO ASSISTANT, you will receive a
serial number that will stop the shareware delays in the program
and will allow you to run the program without the opening screen.
You will also be able to use your serial number on future upgrades
of the program.
Remember, if no one supported shareware, there would be nothing out
there but expensive, commercially-produced applications to choose
from. Registration of this program will show that there is interest
in the program and will promote upgrades.
PROGRAM DISTRIBUTION
====================
This program may be posted on BBS's, provided that all files, listed
in the previous section, are included and are not modified in any
way. This program is intended for the private, non-commercial use
of individuals. Any use by a commercial entity in connection with
their business is prohibited, unless an appropriate use license is
obtained from the author.
Companies that distribute shareware are permitted to include this
program in their libraries, provided that they charge only for the
service of distribution and they notify their customers that
registration of shareware programs is expected and payment to the
authors of the programs should be made if they continue to use them.
WHAT IS TVRO? 3
======================================================================
The abbreviation "TVRO" stands for TeleVision Receive Only and refers
to satellite receiving antennas designed to only receive satellite
television broadcasts. It was not so long ago that satellite dishes
were a rather unusual item to have. Today, you can't travel very
far in this country without coming across a household with a satellite
dish in the yard or on the roof.
This method of communication is made possible by a theory that was
developed by science fiction writer, Arthur C. Clarke, in 1945.
Clarke decided it would be possible to place a satellite in a high
enough orbit, over the equator, that the speed and altitude of the
satellite would require 24 hours for the satellite to make one orbit.
Since the orbit takes the same amount of time as one rotation of the
Earth about its axis, the satellite appears to be stationary in the
sky when viewed from the ground. The area, where these satellites are
placed, is known as the Clarke Belt. The satellites are considered to
be in "geosychronous orbit" or are "geostationary," meaning they are
sychronized with the rotation of the Earth and are stationary in
relation to the Earth's surface.
Since the satellites stay, relative to the Earth, in about the same
position, an antenna could be permanently mounted to receive the
signals transmitted by a satellite. Unfortunately, it isn't that
simple because there are a lot of places to "park" satellites around
the equator. The location, where a satellite is placed in orbit, is
referred to as the "parking orbit" and is defined by the longitude
corresponding to the point on the equator underneath the satellite.
A permanently mounted antenna would receive one satellite and would
miss the programming on all other visible satellites. Satellites are
considered "visible" to a dish antenna if they are above the horizon
at the receiving antenna's location.
To solve this problem, home satellite dishes are moveable, allowing
them to receive signals from any geostationary satellite that is
above the horizon at the antenna site. Once adjusted and aligned, the
dish will track all the visible satellites and provide more program-
ming than most people can handle. This tracking abililty is made
possible by a "polar mount" that allows the dish to track the entire
Clarke Belt by moving one adjustment.
FEATURES
========
TVRO ASSISTANT gives you two of the most important calculations for
aligning a satellite dish antenna; the look angle and the dish
focal length. The only adjustment that this program will not
calculate is "declination." Without getting too technical,
declination changes depending on how far north (or south) of the
equator you are. Most dish antennas, when purchase, are adjusted for
the proper declination. If you purchase a dish from mail order or a
home shopping channel, instructions will probably be provided for
setting the proper declination. A chart generally shows what
adjustment is needed for the latitude of you dish.
FEATURES (cont'd) 4
======================================================================
The look angle is a combination of two measurements, azmuth and
elevation. Azmuth refers to the compass heading from the antenna to
a point on the equator directly underneath the satellite. Elevation
is the angle from the horizon up to the satellite. By using both
azmuth and elevation, a point in the sky can be determined for any
visible satellite in geosynchronous orbit.
The other calculation, which is necessary for clear reception, is
"focal length." A satellite dish is actually a reflector that
reflects the microwave signals transmitted by the satellites to the
feed assembly mounted on the dish. The feed assembly is what actually
receives the signals.
The satellite dish works a lot like a camera. When the focus ring on
the lens of a camera is turned, the distance of the lens from the
film is change, allowing items at different distances from the camera
to be in focus. A dish antenna has only one distance to deal with,
the distance to a satellite in orbit. Two factors determine where
the feed assembly should be on a satellite dish, reflector diameter
and depth. With these measurements, you can calculate the distance
from the dish center to the feed assembly for the antenna to be in
focus.
These are the calculations that are available when using the TVRO
ASSISTANT. The only figures you must give the program are the
location of your antenna (latitude and longitude) and the diameter
and depth of your antenna. The program does the rest!
Most of the program is self-explanatory. It will accept an entry in
response to a prompt, as long as the entry meets the criteria for
that particular variable. Other functions active at any time are
shown at the bottom of the screen.
DETERMINING YOUR COORDINATES
============================
There are several sources you can consult to determine the coordinates
of your satellite dish. Don't be too concerned if you don't have the
exact coordinates for your location. For the home satellite dish,
you will probably not need more accurate coordinates than those from
the nearest big city. I would suggest that, if you don't know your
own coordinates and must choose those of a big city, try for a city
no more than 150 miles away.
DETERMINING YOUR COORDINATES (cont'd) 5
======================================================================
One source for coordinates would be a world atlas. Any map that has
latitude and longitude lines will do. Aviation charts are another
good source, probably the best, for coordinate information. Remember
that these maps or charts will probably show lines measuring
"minutes" in between degrees. If you're lucky enough to know someone
with a LORAN or GPS navigation receiver, you can probably get your
coordinates down to the second. Coordinates must be entered into
the TVRO ASSISTANT as degrees and fractions of degrees. Coordinates
that show minutes and seconds should be converted to degrees. Two
decimal places is sufficiently accurate. Seconds are divided by 60
to determine the fraction of a minute, and minutes are then divided
by 60 to determine the fraction of a degree.
A text file (CITIES.DOC) is included with this program. The file
contains the coordinates for various cities around the United
States.
If you can't find your coordinates any other way, let me know when
you register your copy of the TVRO ASSISTANT. Your coordinates will
be sent to you along with your registration number.
MAGNETIC CORRECTION
===================
Magnetic correction is necessary because the magnetic north pole
and the true north pole are not in the same location. Depending
on where you are on the Earth's surface, when your compass is
pointing north, that may be the direction of the north pole, or it
may be several degrees to the right or left of true north. Aviation
and nautical charts are a good source of magnetic deviation
information. The file 'MAGCOR.DOC' is included with this program
listing some approximate magnetic correction figures around the
United States.
MAIN MENU
=========
The main menu provides access to 5 choices:
1 - Display Location
2 - Change Location
3 - Database Maintenance
4 - Satellite Information Display
5 - Antenna Calculations
Display Location shows the current location of your antenna; city,
latitude, longitude, and magnetic correction. Change Location allows
you to change the location information.
MAIN MENU (cont'd) 6
======================================================================
The program maintains a database of geostationary satellites. You can
have a maximum of 100 satellites in the database. Satellite
Maintenance allows you to add, modify and delete satellites. The
Satellite Information Display shows all the satellites, including the
look angles and distances for each satellite.
Antenna calculations is where you enter the diameter and depth of
your dish. The program calculates the focal length of the dish. It
also calculates the f/D ratio. The f/D ratio is the difference
between the focal length and the diameter of the dish. This figure is
important because some feed assemblies are designed for a specific
range of f/D ratio. If your dish falls outside of the range of the
feed assembly, the feed may have to be modified.
DISPLAY LOCATION
================
This option provides display only of antenna location. No update is
permitted from the section. Help is available by pressing "F1" and
you can return to the Main Menu by pressing ESCape.
CHANGE LOCATION
===============
This function allows you to change the location of your antenna, as
it is stored in the program. You are shown the current location and
asked if you wish to change the information. Type "Y" to change the
information or type "N" to return to the Main Menu.
If you choose "Y", you will be prompted to enter the city, latitude,
longitude, and magnetic correction for your antenna location. The
city must have no more than 15 characters (i.e. Los Angeles).
Latitude, longitude and magnetic correction are entered, each as a
positive number, followed by the appropriate compass direction
(i.e. "30N" for 30 degrees north latitude, "120W" for 120 degrees
west longitude). If you enter exactly 0 degrees, no compass
direction is needed. At each question mark, if you want to return to
the Main Menu, press ENTER without typing an entry.
When you confirm the information, the new information will replace
the old, and all satellite data will be recalculated for the new
coordinates.
DATABASE MAINTENANCE
====================
This choice takes you to a sub-menu with three additional options.
1 - Add a satellite
2 - Delete a satellite
3 - Modify a satellite
DATABASE MAINTENANCE (cont'd) 7
======================================================================
These options let you keep your satellite database current with the
ever-changing world of geostationary satellites. New satellites are
launched and placed into orbit, current satellites are moved to
different parking orbits, and older satellites are retired. The
easiest way to keep up with this information is to subscribe to a
satellite TV guide.
ADD A SATELLITE
===============
Choose this option, from the Satellite Maintenance menu, to add a
satellite to your database. Once selected, you will need to confirm
that you want to add a satellite.
The satellite name must be no longer than 15 characters, the field is
case sensitive, and there cannot be more than one space between any 2
characters. Press ENTER without typing any characters in this field
if you want to stop the operation.
The orbit longitude (parking orbit) must be entered in degrees,
followed by a "W" for west or "E" for east. No direction is needed
for 0 degrees. Press ENTER without typing any characters in this
field if you want to stop the operation.
The satellite identifier is a two-letter field that will accept any
two characters. The identifier can follow any format you wish. It's
probably easier if the identifiers are the same as those used by
whatever satellite TV guide you use. Press ENTER without typing any
characters in this field if you want to stop the operation.
The broadcast satellites operate in two different frequency bands,
C band and Ku band. Most of the programming, received by the home
satellite dish, is transmitted on C band. Some satellites transmit on
one band or the other, but some have the capability of transmitting on
both bands.
The C-band prompt appears first. Press "Y" to indicate the satellite
has C-band capability or press "N" to indicate no C-band capability.
Then do the same for the Ku-band.
Once you have confirmed that all information is correct, the satellite
will be added to the database and data will be calculated using the
current location coordinates. Satellites are listed in the database
in numerical order by their parking orbits. The listing begins at
180 degrees, continues through the western hemisphere to 0 degrees,
and then through the eastern hemisphere back to 180. Each time a new
satellite is entered, the database is sorted by parking orbit.
DELETE A SATELLITE 8
======================================================================
This option will delete a satellite from the database. Enter the
exact name of the satellite, as it appears in the database. The
best way to determine how the satellite is listed in the database
is to choose Satellite Information Display (#4) from the Main Menu.
If you press ENTER without typing any characters in the field, you
will stop the operation.
If a valid satellite name is entered, the name, ID, and parking
orbit will be displayed. When you confirm that you want that
satellite deleted, it will be removed from the database.
MODIFY A SATELLITE
==================
This option will modify a satellite currently listed in the database.
Enter the exact name of the satellite, as it appears in the database.
If you press ENTER without typing any characters in the field, you
will stop the operation.
If a valid satellite name is entered, the name will be displayed and
you will be given the option of changing the parking orbit. To change
the parking orbit, type the new longitude in degrees, followed by
"W" for west or "E" for east. No compass direction is necessary for
an entry of 0 degrees. To retain the old orbit, press ENTER without
typing any characters in the field.
Next, the satellite ID will be displayed. To change it, type the new
two-letter identifier. To retain the old identifier, press ENTER
without typing any characters in the field.
Now you are given the option to change the band status of the
satellite. If you choose to modify the band status, you will be
prompted for each band, C and Ku. If you do not choose to modify
the band status, the previous settings remain unchanged.
Once you confirm that the updated information is correct, the
satellite will be stored with the new information. All data will
be recalculated for that satellite and it will be place in the
satellite database, sorted by parking orbit.
SATELLITE INFORMATION DISPLAY
=============================
This option is on the Main Menu and allows you to view all satellite
data in the database. The information displayed is the satellite
name, ID, band capabilities, parking orbit longitude, azmuth and
elevation in relation to the current antenna location, and distance
from the satellite to the current antenna location in miles and
kilometers. All available options on this display are shown at the
bottom of the screen.
SATELLITE INFORMATION DISPLAY (cont'd) 9
======================================================================
To print the satellite information, press F10. You will be given the
option of printing the information on a printer or sending it to a
text file.
The printer function is chosen by pressing "P" and begins immediately
after the keypress. If your printer is turned off or not connected,
the program will advise you of the problem and the operation will be
terminated. If your printer is on, but is off-line, the program will
continue to say it is printing until you place your printer on-line.
If your printer is disconnected or turned off before printing is
completed, the program will display the disconnect error, but it may
take several seconds. Printing should work on most any printer that
will print lines of ASCII text.
The text file function sends the file to the current DOS directory
as "SATLIST.TXT". If TVRO ASSISTANT is not on your hard drive,
make sure you have a disk in the current drive before choosing the
"D" option.
ANTENNA CALCULATION
===================
This option allows you to calculate the focal length and the f/D
ratio of you dish antenna. As discussed in the Program section of
this file, focal length is the distance from the center (or apex) of
the dish to the feed assembly. The feed assembly is the equipment
mounted on and pointed toward the center of the dish. The distance
between the feed and the apex must be accurate for the feed assembly
to be properly focused on the dish. The f/D ratio is needed to
determine if a particular feed assembly is designed to work on the
dish.
The home satellite dish is actually a reflector. It reflects
the microwave signals up to the receiving end of the feed assembly.
To calculate the focal length and f/D ratio, you need to know the
diameter of your reflector (or dish) and the reflector depth.
Reflector depth can be determine by taking a piece of string, attach
one end of the string to one edge of the dish, stretch the string
across to the opposite edge and attach it there. Now, measure the
distance from the apex of the dish, straight up to the level of the
string. Both the diameter and depth measurements must be entered
in inches.
ANTENNA CALCULATION (cont'd) 10
======================================================================
The program cannot calculate measurements of zero, so a ficticious
dish is listed to start. Enter the diameter first, then press ENTER.
The field moves to the depth. Now, enter the depth and press ENTER.
The field will move back to diameter. Each time the ENTER key is
pressed while the field is on depth, the figures currently in both
fields are used to calculate the new focal length and f/D ratio.
To retain the same measurement in a field, press ENTER without typing
any characters. The resulting focal length must be less than 1000 and
f/D less than 1. When finished, press ESCape to return to the Main
Menu.
SATELLITE FILE BACKUP
=====================
Each time a function is initiated that changes data in the satellite
database, the old database file is saved as "SATFILE.BAK" before the
new file is written. If your system should happen to loose power
while an update is in progress or if the main data file becomes
unreadable, just delete the bad file and then rename the backup file
as "SATFILE.DAT".
INSTALLING YOUR SATELLITE DISH
==============================
As stated previously, setting up a satellite dish is not as difficult
as most people think, if you know where to point the dish once it's
up. The tools you'll need to make the necessary measurements are a
compass, a carpenter's level, tape measure, and something to measure
the angle of your mount in relation to what would be level to the
horizon. A local hardware store might be able to help you with this.
I used a protractor and a small level to make my initial adjustment of
the angle of the antenna mount.
First, you must select a good place to install your satellite dish.
This is what's known as a "site survey." Take your compass, whatever
device you choose to measure the elevation angle up from the horizon,
and a printout from the TVRO ASSISTANT. By using the look angles on
the printout, along with your compass and elevation measurement
device, you can quickly determine what satellites your dish will be
able to see at the intended installation location. Keep in mind that
any obstruction could degrade the quality of signal you'll receive.
If you're setting up a dish in winter, a tree that has no leaves and
creates no obstruction now, may be a significant obstruction come
spring when the leaves are out.
INSTALLING YOUR SATELLITE DISH (cont'd) 11
======================================================================
Got the site pick out? Now it's time for the installation. It would
be impossible to describe here how to hook up cables because of the
variety of equipment that is available. Here, we will assume that
the only help you need is to get the dish pointed at a satellite so
that a picture shows up on the television. The carpenter's level is
necessary when you put the mounting pole in the ground because the
pole must be as close to perfectly level, straight up and down, as
possible. Once you have the dish mounted and all cables connected,
it's time to see if you can get a picture.
I recommend that you place a portable TV somewhere near the dish so
that you can see it while making adjustments. You can have someone
watch the TV in the house and yell to you when there is a picture,
but, take my word for it, this is not the best way to align a dish.
Look at your TVRO ASSISTANT printout. Choose a satellite that has
the highest elevation figure. Also check you satellite TV guide to
make sure there is something other than occasional video on that
satellite. Set your receiver for the transponder (channel) that is
most likely to have video. Now, to the dish.
One thing must be considered when using a magnetic compass to
determining azmuth. The satellite dish must be aligned with the
true north and south poles of the Earth. But the magnetic poles,
which cause the compass needle to react, are slightly offset from
the true poles. The amount of correction needed between magnetic
and true north depends on your location. Someone in California would
need to add about 15 degrees to the magnetic compass heading to find
the true heading, New York would need to subtract about 12 degrees,
while Illinois needs no correction. The file MAGCOR.DOC, included
with this program, lists the average magnetic variation for each
state in the United States. Another source for magnetic variation
is an aviation chart. Dotted lines, known as Isogonic Lines, are
printed on the charts along with the amount of magnetic variation.
The dish mount, which is sitting on the mounting pole, has the
capability to rotate around, just like a compass needle. If you're
in the northern hemisphere, your antenna mount should be pointing at
an azmuth heading of 180 degrees, or directly south. If you're in
the southern hemisphere, the mount is pointed at 0 degrees (360
degrees), or north.
Find the look angles of the satellite you chose. Adjust the azmuth
of the dish by using the dish actuator control on your satellite
receiver. Each dish mount has an adjustment for controlling the
elevation of the dish. Move this adjustment until the dish is
pointing up at the same elevation as shown on the printout. Got it?
Now, go back and check the azmuth and elevation to make sure they're
as close to the printout figures as possible.
INSTALLING YOUR SATELLITE DISH (cont'd) 12
======================================================================
Now comes the fun part. Watch your TV while you make small adjustments
to the elevation of the dish and to the actuator control. If you are
set to C band, you should start to see something on the TV as you make
your adjustments. Continue adjusting only the dish elevation and
actuator control until you get the best possible picture on that
satellite. No picture? Try a different transponder.
Once you have the best picture on that satellite, move the dish, using
the actuator control, to a satellite that is closest to the horizon
from your location. This could be a satellite to the east or west,
depending on where you are. Move the actuator back and forth to get
the best possible picture. The picture may not be completely clear,
but don't worry. When you've got the best picture you can, go to
the dish and adjust the dish mount AZMUTH. Remember, this is the
adjustment you set at 180 (or 0 for the southern hemisphere). Make
very slight adjustments back and forth until you've got the best
picture. Tighten the mount set bolt when you finish the adjustment.
When you've completed that adjustment, go back to the highest elevation
satellite and adjust the dish elevation. Then return to the farthest
east or west satellite and adjust the azmuth again. Keep this up
until no further adjustments are necessary. Your dish should now be
aligned and you are ready to enjoy the best that television program-
ming has to offer.
Perhaps you feel this is too much work and you'd rather let someone
else, who knows what they're doing, align your dish? I wasn't willing
to pay someone $500 to do something I was sure I could do with the
proper information. The most you're out, if you try it yourself, is
the cost of registering this program (you did register, didn't you?).
NEED SOME PROBLEM SOLVING?
==========================
I am interested in any bugs encountered while running the TVRO
ASSISTANT. Report problems in any of the following ways:
On CompuServe: 74176,430
On Internet: cdavis@cdss.win.net
By mail: CHRIS DAVIS SOFTWARE SYSTEMS
PO BOX 2382
ATASCADERO CA 93423-2382
By fax or voice: (805) 238-5714
There is surely a bug or two that I haven't found yet, so let me
know if you have any problems.
SYSTEM REQUIREMENTS 13
======================================================================
IBM-compatible, DOS 5.0 or greater (the program may work with earlier
DOS versions but that operation is not guaranteed), 286 or greater,
CGA or better, and at least one disk drive.
SUGGESTIONS FOR FUTURE UPGRADES
===============================
Do you see something in the program that you like or don't like,
I'd like to hear from you. Any suggestions will be greatly
appreciated and may be included in future upgrades.
DISCLAIMER
==========
This software application is offered "as is" with no warranty of
suitability for a particular purpose. In no event will Chris Davis
Software Systems be liable for special, incidental, or consequential
damage resulting from the possession or use of this product.
REGISTRATION <TVRO Assistant v1.20>
======================================================================
If you plan to continue using this program beyond the 15-day trial
period, please register by completing the form below. Mail the
form and the $10 registration fee to:
CHRIS DAVIS SOFTWARE SYSTEMS
PO BOX 2382
ATASCADERO CA 93423-2382
Name: __________________________________________________________
Address: _______________________________________________________
City, State, Zip: ______________________________________________
Phone (optional): ______________________________________________
Computer make: _________________________________________________
Drive types: ___________________________________________________
Where did you get your copy of TVRO ASSISTANT?
_______________________________________________________________
Suggestions:
_______________________________________________________________
_______________________________________________________________
_______________________________________________________________
_______________________________________________________________
THANKS FOR SUPPORTING SHAREWARE AND THE TVRO ASSISTANT!